Computer FAQs

First check the computer's power cord to make sure it is completely plugged into the wall socket. If you are using a power board, make sure it is completely plugged into the wall socket and that the power switch on the power board is turned on. Some power boards also have a built in circuit breaker / reset switch which usually looks like a black or red button near the power switch. Press the button to reset it and see if that solves the problem. Some computers also have a switch next to where the power lead plugs in, check that it's turned on. Failing that, be sure you aren't having a power outage / cut.
There are many reasons why a computer may just stop working or "freeze". Most of the time there isn't much we can do about it, it is a fact of life that computer programs have become so complex that occasionally users will experience problems even when performing common tasks. When your computer no longer responds to keyboard commands your best bet is to restart the computer. Continual crashing and blue screening can be a result of a hardware issue, be sure to get your computer checked out in this case.
As with most computer errors, your first step is to shut down your computer and restart it. This will help you determine whether or not you actually have a hard disk problem. If the disk is severely damaged then your computer will probably fail to restart properly. Be sure to check that you don't have a disk in the DVD drive or a USB drive plugged in, as the computer may try booting from those. If all else fails, then contact Kwinana Computer Repairs, this is a job for the professionals.

Monitor FAQs

Make sure the monitor is on. If no power light (green or orange light) is seen on the monitor display try pressing the power button until it comes on. If your computer monitor was on and you stepped away from the computer and upon returning it was black, it's likely that the computer is asleep. Try moving your mouse, clicking the mouse buttons, and/or pressing any key (space bar) on the keyboard to wake it up. Make sure that the monitor is connected properly to the back of the computer.
You may receive a distorted image when the cable is loose or defective. Disconnect the video cable going from the back of the computer and verify that no pins are bent, burnt or broken. Once verified re-connect the monitor cable. If the refresh rate is not properly set the monitor may have a wavy or an appearance that lines are going down or across the monitor slowly or fast, this may also cause a flickering affect. A distorted image can be caused by magnetic or other types of interference. Verify no speakers, fans or other magnetic devices are close to the monitor.
Verify that the monitor is properly connected in the back of the monitor as well as to the back of the computer. If the monitor appears to be connected properly, verify that a cable is not loose by disconnecting all cables that can be disconnected in the back of the monitor (generally the data cable cannot be disconnected). Next, disconnect the data cable connected to the back of the computer and then reconnect the cable. When connecting the cable in the back of the computer ensure the cable connection is tight. Most Computers will also have screw ends that can be screwed in to hold the connector in place.
If the resolution was recently changed it is possible for the monitor to not auto adjust or shift to the correct size. If this occurs, the resolution can be changed back to the original setting or you can manually adjust the monitor. If a black border exists on the monitor it can generally be resolved by manually adjusting the horizontal or vertical width. Because each monitor is different, the method of adjusting this setting will vary; consult your monitor documentation.

Mouse and Keyboard FAQs

Users who have an optical mechanical mouse (most common mouse for desktop computers) are likely experiencing erratic behaviour because the mouse is not clean or is dirty. If you've cleaned the mouse and continue to encounter issues and this mouse has worked in the past fine unfortunately your mouse is likely defective. One additional test that can be done to help determine if this is the case or not is to connect the mouse to another computer. Otherwise we suggest replacing the mouse.
If you're running any version of Microsoft Windows and are encountering issues with the mouse wheel, first attempt to adjust the mouse settings through the Mouse Properties window. This window can be accessed by opening the Control Panel and double-clicking the Mouse icon.
The keys on a keyboard are only clipped on, with a knife or other thin object, carefully pop the keys off, this will allow you to clean under the keys as well as cleaning the keys themselves (make sure you remember where they went!).

Windows FAQs

To get into the Windows 7 / 10 Safe mode, as the computer is starting up press and hold your "F8 Key" which should bring up the "Windows Advanced Options Menu". Use your arrow keys to move to "Safe Mode" and press your Enter key.
If you are running Microsoft Windows 7, Windows 10, or a later version of Microsoft Windows, you are eligible to update Microsoft Windows, and in some cases, your computer hardware with the latest drivers through Microsoft's update site, visit http://windowsupdate.microsoft.com. In most cases your computer should be set to automatically update when a new update becomes available.
Users should not simply press the power button or restart the computer while Windows is still running unless there is an issue with the computer. Microsoft has included the shut down feature because it enables a computer to go through all the necessary steps that are required before turning off the computer. In fact many versions of Microsoft Windows will check the computer for any problems if the computer is not shut down properly.
Double click the recycle bin icon on your desktop, here you will see all of the files within your bin. Select the files you wish to recover, right click and choose restore.

Email FAQs

Verify that your computer is able to see the Internet to ensure that your computer is not encountering a connection issue, which would be causing your e-mail issue. You can do this by loading your internet browser and checking if you able to lead a web page. Check with your internet or email provider to find out if they are having issues.
If the e-mail box is full of other e-mail messages, and/or your storage space is only a few megabytes, it's possible that the attachment being sent cannot be received. Often if this problem is occurring the person sending the e-mail should get a response back from your e-mail server indicating that your mailbox is full and/or has exceeded its allocated size. Because computer viruses and other malware are best distributed through e-mail, many e-mail service providers, companies, and e-mail programs prevent certain types of file extensions from being distributed or received through e-mail. For example, Microsoft Outlook protect its users by automatically disabling certain file extension types from being received in e-mail.
Just like an Internet URL no spaces are allowed in an e-mail address. However, names can be broken up using a period; for example, John Smith may have an e-mail address: [email protected] or [email protected] because no spaces are allowed in the e-mail address.

Printer FAQs

When printing on untraditional paper your printer may experience smudges, un-even or crooked text, and/or text that runs off the edges of the paper. Your printer may be printing fuzzy, blurry, and/or other faint text because of dirty print heads. All modern printers have some type of printer cleaning, self-test, and/or diagnose mode that can be performed to check and clean the printers print heads and other internal equipment used to print.
Turn off the printer. Inspect the location or tray the printed paper ejects to. If the stuck paper is visible manually remove it. Remove all paper trays and any paper that may be stuck between the tray and the printer. If the stuck paper is visible manually remove it. Open the printer door that allows you access to the printer ink cartridges or toner and look for any stuck paper. If the stuck paper is visible manually remove it. Turn the printer back on.
Thankfully a missing printer installation disk or disc is not the end of the world and will not require you to wait until a new diskette or CD can be sent to you. Today all printer and other hardware manufacturers are providing downloads on the Internet to their software programs and drivers that are included with their products.

Network FAQs

Verify that the network cable is properly connected to the back of the computer. In addition, when checking the connection of the network cable, ensure that the LED's on the network are properly illuminated. For example, a network card with a solid green LED or light usually indicates that the card is either connected or receiving a signal. Note: generally, when the green light is flashing, this is an indication of data being sent or received.
Open Microsoft Explorer. From Explorer, click the Tools drop down menu and click the option "Map Network Drive." Specify the network drive or network computer as the folder. If the computer's name was hope, to map to that computer, type \\hope If you wished to map to a shared folder on the hope computer such as a mp3 folder, you would type \\hope\mp3. If a different username or login is required to connect to this computer or drive it must be specified in this window before clicking the finish.
Right-click My Computer. Click Properties. In the Properties window, click the Computer Name tab. Within this tab you'll be able to see the full computer name, workgroup and also a description. If you wish to change the name or workgroup, click the Change button.

Virus FAQs

A computer virus is a software program that has been intentionally created to cause a user grief, spread to other computers, or destroy data on an individual's computer. To help prevent a computer from becoming infected by a virus, software developers have developed anti virus programs that stay active on the computer helping to protect it. It is important to realize that many computers do not come pre-loaded with these already installed and that if computers do come with these programs, the programs may expire within 90 days.
Microsoft Windows 7 and 8 do not come pre-installed with a virus protection program. Windows 10 however comes with Windows Defender, although not the best Antivirus program, it's certainly better at a lot of them and it has the added bonus that it automatically updates with Windows.
No, they don't. Computer viruses are software code designed to spread to computer files and other computers, delete files, and cause other problems with the data on the computer. Sometimes they can reconfigure the computer's firmware and in turn, the mainboard will cease to function (not so common today as computers usually have dual bios's to prevent this). So if you're experiencing an issue with a hardware device such as your printer, video card, sound card, etc. it is not due to a virus.
If your computer is infected with a virus formatting or erasing the hard disk drive and starting over will almost always remove any type of virus. However, keep in mind if backups have been made that contain the virus, other media or drives connected to the computer have a virus, your computer is connected to another computer on a network with a virus, and/or the virus is stored on some other type of software you use with your computer it can become re-infected if not properly protected.